2011년도 MCIK 제1차 유변학 정기 세미나 - 유변학 기초 및 응용 관련 세미나 ( Practical Approach on Industrial Rheology and Rheometry ) & Workshop

관리자

저희 MCIK에서는 국내 응용 유변학 (Applied Rheology) 의 저변 확대와  그동안 고객 여러분의 성원에 답하고저 2011년도  제1차  Annual Rheology Seminar 를  아래와 같이 개최하오니 관심있으신 분들의 많은 참여 부탁 드립니다;

 



1. 행 사 명 : 2011년도 제 1차 MCIK 정기 유변학 관련 강좌

2. 주 최: MCIK / 독일 Thermo Electron (Karlsruhe) GmbH

3. 일 시 : 2011년 04월 12일 (화)  9:30AM ~ 4:30PM  /  

            2011년 04월 13일 (수)  9:30AM ~ 4:30PM     

4.  장소:  서울  서초구 외교센터 빌딩 2층 203호

            (지하철 3호선 양재역에 하차 8번출구 예술의 전당 방면 도보 5분)

           - 외교센터 ( http://diplomatic.dic.co.kr/  ) 유로 주차장 1일 20,000 원

            ( 사전 신고시에 한함)

 

5. 참 가 비 :  무료  (점심 식사는 제공되지 않습니다)

 

6. 접수 마감일:  2011년 04월 01일 금요일 5:00 PM  

                    (한정된 좌석 사정으로 등록 순서대로 참가증을 교부 합니다)

 

7. 참가신청방법 : 참가신청서를  MCIK 에  우편, Fax 또는 E-mail로 송부

                     *참가신청서: 첨부 파일 

 

8. 접수 및 문의 :  MCIK 행정 지원부



Tel: 02-3143-2740 / 1979, Fax: 02-3143-2753, E-mail: admin@mcik.co.kr

담당:  황 병진 부장

 

9. 강연및 강사

 

Speaker:  

Dr. Klaus Oldörp

Senior Application Specialist , Thermo Electron (Kalrsruhe) GmbH, Germany

 

PhD 1994 on polymer rheology, University of Hamburg, Germany

1993 - 1997 Project leader Synthetic resins, Fraunhofer Research Institute for Wood Research, Braunschweig, Germany

1998 - 2001 Occupatinal Health and Safety Expert, ICI Polyurethanes (later Huntsman Polyurethanes), Everberg, Belgium

2002 - 2003 Independent Consultant, Belgium

2003 -         Senior Application Specialist, Thermo Fisher Scientific, Karlsruhe

 

Speaker:    김승록 박사 (MCIK 대표)

 

Dr Kim has obtained his Ph.D. in Applied Chemistry from the Centre for Applied Colloid & BioColloid Science (Swinburne University of Technology) in Melbourne in 1994. Following his Ph.D candidature, he accepted a position as a post-doctoral fellow for 2 1/2 years in the area of rheology and polymers. He continued his research work as a postdoctoral research fellow for both the Rheology and Material Processing Centre and the Polymer Technology Centre at the Royal Melbourne Institute of Technology (R.M.I.T). He then worked as a senior research fellow at Kwangwoon University in Seoul and has also worked as a lecturer at the Yeonsei and Samyook Universities in Korea.  Dr. Seungrok Kim then worked as a Thermo Haake regional manager in Asia-Pacific till the beginning of 2002.   Dr. Kim established MCIK in early March of 2002. This has been sought after his determination in applying his profound MC knowledge into real cases with regard to a wide range of rheology- and material characterization-related scientific and technological problems.

 

 

Thermo Electron 사의 Haake RheoWin  Programme 및 Demo specimens 과 비디오 교재등을  이용하여   유변학적인 방법을 이용한 현탁액내  입자의 분산성 향상 및  최적 시료 Formulation  파악  및 최적 작업 조건 도출 및 효율성있는 QC 방법 개발등 산업체의

다양한 Applications 과 관련되어  시도되는 유변학 기초 강연 및 관련 이론의 응용을 위한 Workshop.  

Rheology  기초 이론의 소개 및 다양한 재료를  사용하여 실제 시험에의 응용 과정등을  소개하고

도출된 시험 결과의 해석 및 응용 사례등을 소개하게 됩니다.

 

유변학 시험 결과의 정확한 해석을 위해 시도되는 Particle size, 접촉각, 표면장력 및 제타 포텐셜등 보족적인 다양한 종류의

시험 방법에 대한 소개 및  목표로 하는 Geometry 의 Film 제조등 응용 방법 관련 질의을 받아 가면서 진행하여  

Rheology 이론 및  실제 시험에의 응용을 위한   유익한 Forum  이 될 것입니다.  

 



 

* 2011년 04월 12일 (화)  9:30AM ~ 4:30PM    첫째날

 

(1-1)   09:30 ~ 10:50 강좌 1   (Dr. Klaus Oldörp)

 

-      Part-1. : Measuring Principle of Rotational Rheological Measuring Systems.

          

-      Part-2:    Basics of Rotational Rheological Measurements - I : Steady Shear Rotational Rheological Measurements

 

10:50 ~ 11:05 Coffee Break

 



(1-2) 11:05 ~ 12:35  강좌 2  & Workshop (Dr. SR Kim)

 

-      Part-3. Basics of  Practical Rotational  Rheological  Measurements I- Steady Shear Rotational Rheological Measurements

     

-      Part 4.  Steady Shear Measurement  Workshop

                    Rotational Experiments :  Comparison of rheometer data against spindle viscometer test data, 

                    flow curves and constitutive equation fitting,  thixotropy and time dependent measurement

                   and yield stress determination

 

12:35 ~14:00 Lunch

 

 

(1-3) 14:00~15:30   강좌 3  (Dr. Klaus Oldörp)

-     Part 5. Basics of Rotational Rheological Measurements - I I:  


      Optical rheology measurements with a RheoScope module

      Extensional rheology measurements

      Psyco-tribological measurements  etc.

 

 

15:30 ~  15:45 Coffee Break

 

 

(1-4) 15:45~16:30   강좌 4 & Workshop (Dr. SR Kim)

 

- Part 6. Workshop 

     Axial measurements  ( tack measurements )

     Vane test methods

     Data evaluation and analysis elements

    Regression parameters

     Thixotropy tests

     Yield stress measurements

 

 

-  Part 7. Rheology Application Tips

   Useful topics having industrial significance ( dispersion and  levelling etc.)

   Making use of rheological models

   Importance of colloid & surface chemistry for rheology

   Introduction of various methods used to help interpretation of rheological testing data

   (surface chemistry, DLVO and zeta potential etc..)

   Particle mechanics for rheology

   Practical application of rheology  

  On-line monitoring of  rheological parameters and particle aggregation information

  



 



 

* 2011년 04월 13일 (수)  9:30AM ~ 4:30PM    둘째날